Stainless Steel Wall Tile Trim

Stainless Steel Wall Tile Trim

Length option:600MM/800MM/1200MM/2440MM Material:SUS304 with quality glass and stone SUS surface treatment:Brushed Note: Matching corners/end caps are available. How to fix thestainless steel wall tile trim on the latex paint wall Inlay method 1, in the surface of the stone to pull out the size...

Product Details

2.jpg3.jpg5.jpg4.jpg6.jpg



SPEC.9.jpg


Length option:600MM/800MM/1200MM/2440MM

Material:SUS304 with quality glass and stone

SUS surface treatment:Brushed

Note: Matching corners/end caps are available.

11.jpg




17.jpg

How to fix thestainless steel wall tile trim on the latex paint wall

Inlay method


1, in the surface of the stone to pull out the size of the decorative strip groove, the depth is determined according to need, that is, the decorative strip above the board size or the mosaic size is determined, the depth of the groove is slightly deeper than the actual size


2. Apply marble adhesive to the stone trough, and insert the stainless steel wall tile trim strip into the stone trough, and determine the good position and height


3. After waiting for a few minutes, if the marble adhesive is not completely dry, use a utility knife to scrape off excess or overflowing gel, and wait until it is completely dry.


Float method


1. Apply marble adhesive directly to the bottom of the stainless steel wall tile trim strip. After determining the size, stick it to the surface of the stone. Generally, it is recommended to use an angle grinder to first grind the rough position.


2. After waiting for a few minutes, if the marble adhesive is not completely dry, use a utility knife to scrape off excess or overflowing gel and wait until it is completely dry.



Inquiry