Double-rail Edging Profile For Bonding Accent Tile

Double-rail Edging Profile For Bonding Accent Tile

JECA Decorative trim is a double-rail feature strip profile that features a recessed section to which field or accent tile is bonded. Create designer accents on walls, chair rails, and other various decorative applications Prevents tile edges from chipping Features an integrated joint spacer that creates a defined joint cavity between the accent tile and the profile Universal accessory piece can be used to produce a 90° inside corner, 90° outside order, and end cap Available in various finishes of stainless steel
Chat Now

Product Details

201804081357077380775

  • Function


  JECA Decorative trim is a double-rail feature strip profile that features a recessed section to which field or accent tile is bonded.

Create designer accents on walls, chair rails, and other various decorative applications
Prevents tile edges from chipping.

Features an integrated joint spacer that creates a defined joint cavity between the accent tile and the profile.


Universal accessory piece can be used to produce a 90° inside corner, 90° outside order, and end cap
Available in various finishes of stainless steel.

DR详情DRxxDRXXX


  • Installation

  1. Set tiles up to the area where DR  is to be installed as a feature strip.

  2. Using a notched trowel, apply a sufficient amount of thin-set mortar to this area and/or to the back of DR and press the profile into the mortar and align. Leave a space of approximately 1/16" – 1/8" (1.5 – 3 mm) between the profile and the tile.

  Note: DR may also be attached to the substrate with fasteners.

  3. Set the adjacent row of tiles. Leave a space of approximately 1/16" – 1/8" (1.5 – 3 mm) between the profile and the tile.

  4. To set tile along the face of DR, apply thin-set mortar to the back of the tile using a margin trowel. Press the back-buttered tiles into the face of the profile, making sure to force thinset mortar fully into the dovetailed grooves. The tiled surface should be flush with the outer edge of the profile. 

  Note: The recessed face accepts tile widths up to 2" (51 mm).

  5. Fill the joint completely with grout or setting material.

  6. Work with materials and tools that will not scratch or damage sensitive surfaces. Setting materials must be removed immediately, especially from aluminum.

  Note: Matching inside corners/outside corners/end caps are available. Corners/end caps are held in place with thin-set mortar. Fill the ends of the profile with thin-set mortar prior to inserting the accessories.

  • 新闻1

新闻2


  • Maintenance

JECA DR decorative profile requires no special maintenance or care and is resistant to mold and fungi. Clean profiles using common household cleaning agents.

In the case of Stainless steel, do not use abrasive cleaning agents.

contact us


Inquiry